Description
RC4WD TRAIL FINDER 2 TRUCK KIT W/MOJAVE II BODY SET
Adventures can happen anywhere. Nothing will give you more fun in the sand, dirt, snow, or mud than the Trail Finder 2. Part scale truck, part adventurer, your TF2 is ready for your mud kicking trail-loving lifestyle!
The TF2 has both detailed styling and aggressive performance. You will find a balance of capability and performance built into every TF2.
Performance of the TF2 is smooth and with its 2 speed selectable transmission, 4WD drivetrain, bullet-proof transfer case and quality metal components throughout.
The TF2 is truly a work of art in both appearance and performance.
Every TF2 is compatible with a full range of option and performance parts designed to enhance the performance and add to the scale look of the only true scale 1/10 offroad truck... The Trailfinder 2.
Your adventure awaits....
Features
- Custom Designed for True-to-Scale Looks
- Realistic Billet Aluminum Ladder Frame Chassis
- 2 Speed Remote Selectable Transmission
- Center Mounted Realistic 4x4 Transfer Case
- Yota II Ultimate Scale Cast Axles
- True to Scale Leaf Spring Suspension
- Highly Detailed Body with Dropped Bed and More
- 1.55’’ Stamped Steel Beadlock Wheels with Lug Nuts
- Super Grip High Performance Mud Thrasher Tires
- Realistic Tube Bumpers - Rock Rails - Skid Plate
Specifications
Hammer Transfer Case
Ratio: 1.47:1
Gears: Wide .8 Mod Steel Gears
Features: 8 Bearings, Cast Casing, Hardened Gears
R3 2 Speed Transmission
Ratios: Pinion/spur 14/64 = 4.57:1
1st Gear: 3.47:1
2nd Gear: 1.27:1
Gears: Wide Steel .8 Mod, Delrin Spur, Slipper Clutch,
Features: Machined Billet Aluminum Casing, Scale Looking, Motor Mount can be adjusted with up to 10 different Positions, Compatible with other Brand Spurs (Axial, Traxxas, Robinson).
Yota II Ultimate Scale Cast Axles
Ratio: 15/40 = 2.67:1
Width at Hex (using 4mm TF2 Hexes): 178.2mm
Trail Finder 2 Chassis
Features: Billet Aluminum Construction, Adjustable Shock Hoops
Drive Shafts
High Quality Plastic Material, Very Durable High Quality Steel Yokes
Wheels
Name: 1.55" OEM Beadlock Wheels
Hub: 12mm Hex
Width: 22mm
Back Spacing: 9mm
Features: Stamped Steel, Aluminum Hub, Internal Beadlock, Very Scale Looking, 6 Bolt Pattern.
Bumpers
Tough Armor TF2 Winch front bumper
Tough Armor TF2 Rear Bumper
Tough Armor TF2 Side Sliders
Authentic Looking Crawler Style Tube Bumper. Very High Quality Flexible Plastic, Very Durable, Very Scale.
TF2 Truck Dimensions
Wheelbase: 287mm (11.3")
Width: 215mm (8.5")
Height: 210mm (8.25")
Ground Clearance: 57mm (2.5")
Final Drive Ratios: 1st - 62.1:1, 2nd - 22.75:1
What's Included
- 1 x RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set
Notes
- This is a kit that requires building time (appro. 2-3 hours) and electronics.
- While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
- Use good quality hex drivers to avoid stripping screw heads.
- Use thread lock when putting metal screws into metal parts.
- Steps marked with an asterisk (*) require thread lock.
- Use thread lock sparingly.
- Do not over tighten screws otherwise you may strip the thread.
Required To Complete
Truck Kit
- Hex Drivers (1.5mm, 2mm, 2.5mm)
- Long Nose Pliers
- Associated Thread Locking Adhesive
- Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)
Body Kit
- Modeling / Craft Knife
- Body Reamer
- Side Cutters
- Instant glue / Plastic Cement (prefer non whitening)
- Hex Drivers (1.5mm, 2mm)
- Cross Phillips Screwdrivers (small)
Electronics
- Motor (35t, 45t, or 55t)
- Radio and Receiver (3 channel or more) (3 Channel Z-R0009, or 4 Channel Z-R0006)
- 2 x Z-E0090 or Lipo battery
- Charger (Consult your battery guide) Chargers
